![]() Minor = 0 /* board index, minor = 0 uses /dev/gpib0, minor = 1 uses /dev/gpib1, etc. * minor = 0 configures /dev/gpib0, minor = 1 configures /dev/gpib1, etc. * for an interface board, such as board address, and interrupt level. * This section configures the configurable driver characteristics wget -content-disposition -no-check-certificate Įdit /etc/nf (as superuser) to fill in the correct board type: interface starts new interface board section ![]() Sudo apt-get install python-dev libboost-python-dev python-setuptools -yesĭownload the linux-gpib package, unpack and build: wget -content-disposition -no-check-certificate Īlso download the firmware binary for the 82357B: wget -content-disposition -no-check-certificate įxload is used to upload firmware to the GPIB interface. The rest of this document describes the actions of the installation script step-by-step.įirst, get the packages that are necessary to support Python bindings: sudo apt-get update I initially had some problems installing on my laptop, so decided to boot Ubuntu 12.04.5 LTS, 3.13.0-32-generic from USB and work from there.įor an automated installation script, see gpib_install.sh (and nf) below. GPIB interfacing using Agilent 82357B on Ubuntu Linux
0 Comments
Leave a Reply. |